Stihl FSE 60 Instruction Manual page 44

English
Winding line onto spool
3
2
3
5
Use green-coded nylon line with a
N
diameter of 2 mm (0.08 in).
Cut two 2 m (6ft 6in) lengths of
N
nylon line from the reel (special
accessory).
Rotate the spool (2)
N
counterclockwise until the two arrow
points are in alignment.
Push the straight end of each line
N
through one of the sleeves (5) in the
mowing head (3) until you feel a
noticeable resistance – and then
continue pushing as far as stop.
42
Hold the mowing head steady.
N
Rotate the spool counterclockwise
N
until the shortest line is about 10 cm
(4 in).
If necessary, cut the longer line to a
N
length of about 10 cm (4 in).
The mowing head is now full.
FSE 60, FSE 71, FSE 81