Hamilton Beach Stack & Snap 70720G-SAU Operation Manual - Original Instructions page 3

D
12. o not let cord hang over edge of table or
counter, or touch hot surfaces.
K
13. eep hands and utensils away from moving blade
and disc while processing food to reduce the risk
of severe personal injury and/or damage to the
A
food processor.
ONLY when the food processor is not running.
T
14. he blade and disc are sharp.
S
tore out of reach of children.
T
15. o reduce the risk of injury, never place cutting
blade or disc on base without first putting bowl
properly in place.
B
16. e certain lid is securely locked in place before
operating appliance.
N
17. ever feed food into food chute by hand.
A
lways use the food pushers.
D
18. o not attempt to defeat the lid interlock
mechanism.
M
19. ake sure the blade or disc has come to a full
stop before removing lid.
rubber scraper may be used but
H
andle carefully.
T
20. o reduce the risk of injury, be sure to insert or
remove blade and disc using hubs provided for
U
this purpose. se caution when removing sharp
cutting and disc from the bowl, when emptying
the bowl, and when cleaning.
C
21. heck that the control is OFF ( ) before plugging
cord into wall outlet.
to OFF ( ); then remove plug from wall outlet.
B
22. e sure to turn switch to OFF ( ) position after
A
each use. lways use the pushers to clear the
W
food chute. hen this method is not possible,
unplug cord from outlet and disassemble unit to
remove the remaining food.
T
23. he appliance is not intended for commercial,
professional, or industrial use.
T
24. o protect against risk of electrical shock, do not
immerse base, motor, cord, or plug in water or
other liquid.
N
25. ever use appliance for a longer period or with
a larger amount of ingredients other than that
T
o disconnect, turn the control
3