Merlin 6-IN-1 DIY EDUCATIONAL SOLAR ROBOT KIT Manual page 3

d) Now we can do the final assembly of the robot. Attach the
body to the wheel assembly and then place the solar
module on top (step 4).
e) Finally connect the wires from the gearbox to the Solar
module as shown in step 5.
3.Solar Wheeler
a) Start by collecting all the parts needed for the Solar
Wheeler as shown in the requirements list. Take the
gearbox A and connect the wheels (B14) then add the
support brackets B13 and the front wheel (B12) as shown
in Step 2.
b) Next place the mounting bracket(B4) on the wheeler
followed by the solar module (step 3). The final step is to
connect the wires from the gearbox to the solar module
(Step 4).
c) The completed Solar Wheeler should look like the one in
step 5.
4.Solar Airboat
a) Start by collecting all the parts needed for the Solar Airboat
as shown in the requirements list. First assemble the
floating platform by connecting (A1) pieces together and
adding the mounting point (C19). These pieces are shown in
step 1.
b) Next take the gearbox B and attach the propeller (A3). Next
connect the mounting bracket (B4) and (B2) to the
assembly. Finally clip the Solar Module to complete the
Solar Airboat (step 2).
c) The final step is to connect the wires from the gearbox to
the solar module (Step 3).
5.Solar Helicopter
a) Start by collecting all the parts needed for the Solar
Helicopter as shown in the requirements list. First take the
base(C24) and connect the feed(A1) to it. Now insert the
mast (C26) and turning arm (C25). Add counter balance
holder (A5) and fitting (A6) as displayed in step 1.
b) Take Gearbox B and clip the housings (A7 and A8) to it and
add the propeller (A3) to this assembly. This assembly can
3