IFM Electronic ecomat 200 Monitor AL-3 Operating Instructions Manual page 37

Numerical entries
Press the or pushbutton and hold it.
The smallest decade becomes active and is counted up or down depending on the
selected pushbutton (e.g. 1, 2, 3, .... 0). Then comes the next decade, etc.
As soon as the pushbutton is released, the active decade flashes. It is set by pressing
the or pushbutton several times. The preceding decade then flashes and can be
set.
Factory reset
The factory default values can be restored by pressing the
multaneously during power on. All entered parameter values are lost.
KEY function
The unit can be locked to prevent incorrect entries.
• Locking:
Press the pushbuttons
es. Release the pushbuttons when the KEY indicator is continuously indicated.
• Unlocking:
Press the pushbuttons
es. Release the pushbuttons when the KEY indicator is no longer indicated.
/ simultaneously and hold them. The KEY indicator flash-
/ simultaneously and hold them. The KEY indicator flash-
AL-3
MONITOR
and pushbuttons si-
37