POZNÁMKA: Před manipulací s vnitřními částmi počítače si přečtěte bezpečnostní informace dodané s počítačem
a postupujte podle kroků popsaných v části
postupujte podle pokynů v části
bezpečnosti naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese
regulatory_compliance.
Témata:
•
Přípravné kroky
•
Procedure
Přípravné kroky
Proveďte kroky 1 až 6 popsané v části
Procedure
1. Disconnect the battery cable from the system board.
2. Remove the three screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
Figure 9. Disconnecting the battery
1. battery cable
3. battery
3. Tilt the battery (applicable for configuration with hard drive only) to release the tab on the battery from the hard-drive bracket.
4. Lift the battery off the palm-rest and keyboard assembly.
16
Vyjmutí baterie
Před manipulací uvnitř
Po manipulaci uvnitř
počítače. Další informace o vzorových postupech v oblasti
„Vyjmutí spodního
krytu".
Vyjmutí baterie
počítače. Po dokončení práce uvnitř počítače
2. M2x3 screws (3)
4. palm-rest and keyboard assembly
5
www.dell.com/