Subscribe to Our Youtube Channel
Related Manuals for CYP CVW-9000W
Summary of Contents for CYP CVW-9000W
- Page 1 CVW-9000W HDMI Multi-Digital Signage TV Wall Control System Operation Manual Operation Manual...
- Page 3 DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
- Page 4 SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
-
Page 5: Table Of Contents
CONTENTS 1. Introduction ............1 2. Applications ............1 3. Package Contents ..........1 4. System Requirements .......... 1 5. Features ..............2 6. Operation Controls and Functions ..... 3 6.1 UART Controller’s Front Panel......3 6.2 UART Controller’s Rear Panel ......3 6.3 Remote Control .......... -
Page 6: Introduction
1. INTRODUCTION To capture the public’s attention, the HDMI Multi-Digital Signage TV Wall Control System is ideal for advertising, entertaining and displaying information. The devices allow users to display HDMI sources to multiple TV/monitors with multi-screen, while using RS-232 to control and fully utilized the display screens over a TV wall. -
Page 7: Features
5. FEATURES • Support video wall combinations of HxV: 3x2 and any customized combination. • Supports both HDMI and PC input sources from Video Wall Control System • Use RS-232 cables to cascade over every connected Video Control System box to remotely control each monitors with one setting only •... -
Page 8: Operation Controls And Functions
6. OPERATION CONTROLS AND FUNCTIONS 6.1 UART Controller’s Front Panel UART CONTROLER CVW-9000W IR receiver window (accepts the remote control signal of this device only) 1~16 Input LED: The LED will illuminate accordingly to which port is selected. 2x2/3x3/4x4: This function is not available. -
Page 9: Remote Control
6.3 Remote Control POWER OFF POWER POWER: Press this button to switch ON UART A B C A B C D E F Controller then the device will also switch on the connected HDMI device and VideoWall Control System. POWER OFF: Press this button to switch OFF UART Controller and the connected HDMI device. -
Page 10: Software Installation
6.4 Software Installation Insert the software into the PC/NB that is going to connect to CVW- 9000W and click on Setup file. Click “OK” to begin the installation. Set the specified destination directory and click on the icon. - Page 11 Set the group name in the Program Group box and click Continue. Click OK to finish the Setup. Open the application program “CVW-9000W” where it had been saved.
- Page 12 Connect the RS-232 COM port first. Choose the video wall mode or power on/off after the RS-232 COM port connects (The “Connect” button will turn to green color).
- Page 13 Click on any one of the video wall modes and enter into the next page, then click the “Set” button to confirm the video wall setting. The “Set” button will disappear after confirmed, click on “Return” to go back to the main page.
-
Page 14: Uart Controller's Rs-232 Pin Assignment
6.5 UART Controller’s RS-232 Pin Assignment RS-232 IN RS-232 OUT Assignment Assignment ► ◄ Connect to Pin 8 Connect to Pin 8 Connect to Pin 7 Connect to Pin 7 Baud Rate: 19200bps Data bit: 8bits Parity: None Stop Bit: 1bit Flow Control: None... -
Page 15: Uart Controller's Rs-232 Commands
6.6 UART Controller’s RS-232 Commands Commands Description 0xEF 0x04 0xE3 0xC2 0x33 0xEE Mode 1 0xEF 0x04 0xE4 0xC2 0x34 0xEE Mode 2 0xEF 0x04 0xE5 0xC2 0x35 0xEE Mode 3 0xEF 0x04 0xE6 0xC2 0x36 0xEE Mode 4 0xEF 0x04 0xE7 0xC2 0x37 0xEE Mode 5 0xEF 0x04 0xE8 0xC2 0x38 0xEE Mode 6... -
Page 16: Connection And Installation
7. CONNECTION AND INSTALLATION UART Controller Video Wall Control System CONTROL HDMI Out HDMI Out HDMI Out HDMI Out HDMI Out HDMI Out HDMI Out HDMI Out DC 24V HDMI In HDMI In HDMI In HDMI In HDMI In HDMI In HDMI In HDMI In HDMI Device... -
Page 17: Specifications
8. SPECIFICATIONS Input Port 1xRS-232 (Female Jack) Output Port 16xRS-232(Male Jack) Power Supply 5V DC/ 1A (US/EU standards, CE/FCC/UL certified) ESD Protection Human body model: ±8 kV (air-gap discharge) ±4 kV (contact discharge) Dimensions (mm) 320(W) x 95(D) x 45(H) Weight(g) Chassis Material Metal... - Page 20 CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.tw 20121128 MPM-CVW9000W...
Need help?
Do you have a question about the CVW-9000W and is the answer not in the manual?
Questions and answers