Led Indicator Displays; Charging Process - Hornbach FQ-AL 120 Manual

LED indicator displays

1
Indicator lights red:
The charger is ready for use.
3
Indicator lights green:
Charging process
Maintenance charging.

Charging process

1
Fit the battery into the duct of
the battery slot 6.
Warning! Do not cover bat-
teries and/or the battery
charger during the charging pro-
cess.
3
When the LED indicator 1 lights
green continuously, the battery
is fully charged. Press the re-
lease button ...
Caution! Never charge bat-
teries at temperatures below
0 °C or above 40 °C.
2
Indicator flashes green:
The battery is charging.
4
Indicator flashes red:
•
finished. Battery is too hot or too cold.
•
Battery or charger is faulty.
2
Push the battery into the bat-
tery slot until it clicks into place.
The LED indicator 1 flashes
green, the battery is charging.
Note: Battery and charger heat
up during the charging process.
This is perfectly normal!
4
... and pull the battery out of the
battery charger. After use, pull
the mains plug.
Caution! Do not charge bat-
teries in an environment
which has high air humidity or at a
high ambient temperature.
EN
69