Eastwood 31638 Instructions Manual page 13

• Place the Tire Iron [M], under the tire bead and
over the rounded beak of the "Duckhead" portion
of the Mount/Dismount Shoe "dd" and use it to
pull the tire bead up and over the entire Mount/
Dismount Shoe (FIG 11).
• At this point, hold the Tire Iron [M] in place and
depress the Turntable Pedal "pp" located at the left
of the 3 pedal cluster. This will cause the Turntable
to rotate in a Clockwise direction and the Mount/
Dismount Shoe will pull the tire bead off the wheel
rim (FIG 12).
Lifting the Turntable Pedal with
the toe of your shoe will rotate the
Turntable in the opposite Counter-
Clockwise direction.
• Pull the tire up so the inner tire bead is now under
the outer bead section of the wheel rim (FIG 13).
• Repeat the above several steps once again using
the Mount/Dismount Shoe and Tire Iron to pull the
inner tire bead off the rim (FIG 13).
• Unlock the Slide Shaft, raise it and remove tire.
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 11
FIG. 12
FIG. 13
M
13