Table of Contents
Advertisement
Answering System Operation
Audible Indicators
This system gives you voice prompts for feature
operations and voice confirmations when you press
a button or complete an operation.
Turn Answering System On or Off
Press ANSWER ON/OFF to turn the system on or off.
When the system is turned on, you will hear "Answering machine on" and the
ANSWER ON/OFF light will be lit.
When the system is off, you will hear "Answering machine off" and the ON/OFF light
will not be lit. The system will still answer after 10 rings if it is off, then announce
"Please enter your security code" and wait for you to enter your two-digit code to
access remote functions. (See Remote Access on page 30 for details.)
Set The Clock
This system comes preset to Monday, 12:00 AM, 2003. If CL flashes in the
message window, you will need to set the correct day and time at the Base.
NOTE: The day and time will automatically be set when you receive your first
Caller ID record if you have not already manually set it.
1. Press TIME/SET. The day, time and year will be
announced, followed by "To set day and time,
press TIME/SET." Press TIME/SET again. The day
will be announced.
2. Press CHANGE until the system announces the
correct day, then press TIME/SET. The system
announces the current hour setting.
3. Press CHANGE until the system announces the
correct hour, press TIME/SET. The system
announces the current minute setting.
4. Press CHANGE to advance the minutes one at a time.
- OR -
Press and hold CHANGE to advance the minutes in increments of 10.
When the system announces the correct minute, press TIME/SET. The system
announces the current clock setting.
NOTE: Press any MAILBOX/STOP button to exit programming at any time. The
MAILBOX/STOP buttons are located on the Base Unit and are labled numbers 1,
2, and 3. These buttons also playback messages left in their respective mailbox.
22
Advertisement
Table of Contents
