Installation - Cobra SC200 Owner's Manual

INSTALLATION

1
MOUNT
To install the Adhesive Windshield Mount, slide the dash cam onto the mount. Remove protective film
from camera lens and display. Find the spot on your windshield where you would like to mount the
camera and confirm the placement. Reminder, this is an adhesive mount, so it is important to mount
correctly the first time. Next, peel the plastic film off the 3M adhesive and press the mount FIRMLY onto
the windshield.
For a View of the Road Behind You
Connect Extension Cable to the Video Input Port on the Dash Cam and run the cable along the floor of
your car. Connect the Extension Cable to the Rear Camera and attach to the vehicle's back window. Please
orient the rear camera so it faces out the windshield as shown here.
2
POWER
Plug one end of the supplied 12V Vehicle Power Adapter into your vehicle's cigarette lighter, and the
other end into the micro USB port. The unit will automatically turn on and start recording. To manually
power on the device PRESS AND HOLD the Power button until the display activates.
6 | P a g e