INSTALLATION
Warning!
•
Do not kink, crash, modify or sever the drain hose.
• Position the drain hose properly, otherwise , improper position may
result in water leakage.
• If drain hose is too long, do not force it into washing machine as this will
cause abnormal noises.
The way to place the end of drain hose.
Levelling the washing machine
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
Levelling the washing machine
1. Check alignment of the product with a
leveler and do the succeeding steps if
necessary.
2. Loosen the lock nut and rotate the foot
either clockwise or counter clockwise ,
until it closely contacts with the floor.
3 Assure that the lock is secure and then
alternately press the four top corners of the
machine, to check if the proper adjustment
has been done.
Warning!
• The lock nuts on all
• Only two feet in front of the machine can be adjusted.
Trough
Hose
Retainer
feet must be screwed tightly against the housing.
four
9 10
foot
Lock nut
loosen
lock
Raise
Lower
right
wrong