C&T International Sorelle 149 Instructions

Advertisement

TODDLER BED WARNINGS

WARNING -
!
• The mattress intended for use on the bed shall be a full size crib mattress having minimum
dimensions of 51 5⁄8 in. (1310 mm) in length and 27 1⁄4 in. (690 mm) in width and 4 in. (100 mm)
in thickness, or greater thickness as specified by the manufacturer.
• The minimum age for a child using this toddler bed shall not be less than 15 months and the
maximum weight shall not be greater than 50 lbs. (22.7 kg).
• DO NOT use with less than 12 inches of space between the transitional bed and solid objects such
as a wall or dresser. Child could slide into smaller spaces and suffocate.
• DO NOT place bed near window where cords from blinds or drapes may strangle a child. Child
may fall out of window.
• Strings can cause strangulation! DO NOT place items with a string around a child's neck, such as
hood strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
• DO NOT use a water mattress.
• DO NOT use casters on toddler bed.
• If guardrail(s) provided must be used to avoid the formation of a gap between the mattress and
the bed that could cause an entrapment.
CAUTION : ANY MATTRESS USED IN THIS CRIB MUST
BE AT LEAST 27 1/4" (69CM) x 51 5/8" (131 CM) WITH
A THICKNESS NOT EXCEEDING 6" (15CM).
• Ensure a safe environment for your child by checking regularly, (that every component is properly
and securely in place) before placing your child in the crib. Make sure that all bolts and fasteners
are tight.
Failure to follow these warnings and assembly instructions
could result in serious injury or death.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sorelle 149 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for C&T International Sorelle 149

  • Page 1 TODDLER BED WARNINGS WARNING - Failure to follow these warnings and assembly instructions could result in serious injury or death. • The mattress intended for use on the bed shall be a full size crib mattress having minimum dimensions of 51 5⁄8 in. (1310 mm) in length and 27 1⁄4 in. (690 mm) in width and 4 in. (100 mm) in thickness, or greater thickness as specified by the manufacturer.
  • Page 2 ( HSY ) 149 - TODDLER RAIL FOR MONTGOMERY CRIB INSTRUCTION TODDLER BED ASSEMBLY WARNING: PLEASE DO NOT TIGHTEN THE BOLTS IN ASSEMBLY PROCESS! 1. Before Toddler Rail assembly, please Remove Footboard(B) and Six (6) Bolts (b) as per below (Figure 1.) 2.Store crib footboard in a safe place.

Table of Contents