Congratulations on choosing to buy a TAURUS TITANIUM® product. All products brought to you by TAURUS TITANIUM® are manufactured to the highest standards of performance and safety, and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 3 Year Warranty.
Page 4
21 30 21 30 21 30 21 30 21 30 21 30 AFTER SALES SUPPORT MODEL NUMBER: BT-SM 2534 DUAL, 12/11 1300 922 271 service.australia@einhell.com...
Page 5
AFTER SALES SUPPORT MODEL NUMBER: BT-SM 2534 DUAL, 12/11 1300 922 271 service.australia@einhell.com...
Page 6
AFTER SALES SUPPORT MODEL NUMBER: BT-SM 2534 DUAL, 12/11 1300 922 271 service.australia@einhell.com...
Page 7
Caution. Read the operating instructions to reduce the risk of injury. Wear ear-muffs. The impact of noise can cause damage to hearing. Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight. Wear a breathing mask.
b. Use safety equipment. Always wear eye 1. GENERAL SAFETY RULES protection. Safety equipment such as dust mask, WARNING! Read all instructions Failure to follow non-skid safety shoes, hard hat, or hearing all instructions listed below may result in electric protection used for appropriate conditions will shock, fire and/or serious injury.
the working conditions and the work to be • Have your tool repared by an expert performed. Use of the power tool for operations – This electric appliance is in accordance with the different from those intended could result in a relevant safety rules repairing of electric appliances hazardous situation.
Page 10
• • Never carry the saw by its cable. Never load the machine so much that it cuts out. • • Do not leave the saw in the rain and never use Always press the workpiece firmly against the it in damp or wet conditions. table and the stop rail to prevent it from wobbling •...
• Pull out the power plug and twist the blade with Important! your hand into the 45° and 90° positions in order When using the equipment, a few safety precautions to make sure that the blade does not touch the must be observed to avoid injuries and damage.
4. ITEMS SUPPLIED (Figs. 1-3) The manufacturer will not be liable for any changes made to the equipment nor for any damage resulting • Open the packaging and take out the equipment from such changes. Even when the equipment is used with care.
Sound and vibration 7. BEFORE STARTING THE EQUIPMENT Sound and vibration values were measured in accordance with EN 61029. 7.1 General Information • The equipment must be set up where it can stand sound pressure level 95 dB(A) securely, i.e. it should be bolted to a workbench, uncertainty 3 dB a universal base frame or similar.
8. FUNCTIONS 7.3 Precision adjustment for 90° straight cut (Figs. 1, 6-8) 8.1 Straight cut 90° (Figs. 1-3, 11) • Fasten the turntable (17) in 0° position. • For cutting widths up to approx. 100 mm it is possible Undo the locking screw (21) and move the machine to fix the saw’s sliding function with the slide lock screw head (4) all the way to the right using the handle (1).
8.3 Bevel cut 0°- 45° (Figs. 1-3, 13) • Now, using a little more force, slacken the flange bolt The sliding mitre saw can be used to make bevel cuts screw (31) in the clockwise direction. • to the left of 0°-45° and to the right of 0°-45° in relation Turn the flange bolt (31) right out and remove to the work surface.
10. CLEANING, MAINTENANCE & ORDERING OF SPARE PARTS Always pull out the power plug before starting any cleaning work. 10.1 Cleaning • Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it down with compressed air at low pressure.
Page 17
AFTER SALES SUPPORT MODEL NUMBER: BT-SM 2534 DUAL, 12/11 1300 922 271 service.australia@einhell.com...
Page 18
AFTER SALES SUPPORT MODEL NUMBER: BT-SM 2534 DUAL, 12/11 1300 922 271 service.australia@einhell.com...
Page 19
AFTER SALES SUPPORT MODEL NUMBER: BT-SM 2534 DUAL, 12/11 1300 922 271 service.australia@einhell.com...
Page 20
TAURUS TITANIUM® is a registered trademark of ALDI Stores. ALDI Guarantee Specially made for ALDI Stores to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store, within 60 days from the date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the Customer Service Hotline.