Advertisement
2.1 Introduction
2.2 Initial inspection
2.3 Packing and
Unpacking
2.4 Environment
2.5 Return for service
2.6 Equipment cleaning
Document SB10EN-30406-1.00 - © NARDA 2013
2 - Installation and use
This section provides the information needed to install and use your PMM
SB-10 Switching Control Box.
It
includes
the
information
requirements, connections, operating environment, instrument mounting,
cleaning, storage and shipment.
When receiving the equipment, first inspect the shipping card box for any
damages.
If the shipping box is damaged, it should be kept until the contents of the
shipment have been checked for completeness and the instrument has
been checked mechanically and electrically.
Verify the availability of all the shipped items with reference to the shipping
check list enclosed with the Operating Manual.
Notify any damage to the forwarder personnel as well as to your NARDA
Representative.
To avoid further damage, do not turn on the instrument when there
are signs of shipping damage to any portion of it.
The operating environment of the PMM SB-10 Switching Control Box is
specified to be within the following limitations:
• Temperature
• Humidity
The instrument should be stored and shipped in a clean, dry environment
which is specified to be within the following limitations:
• Temperature
• Humidity
If the instrument should be returned to NARDA for service, please complete
the service questionnaire enclosed with the Users Manual and attach it to
the instrument.
To minimize the repair time, be as specific as possible when describing the
failure. If the failure only occurs under certain conditions, explain how to
duplicate the failure.
If possible, reuse of the original packaging to ship the equipment is
preferable.
In case other package should be used, ensure to wrap the instrument in
heavy paper or plastic.
Use a strong shipping container and use enough shock absorbing material
around all sides of the equipment to provide a firm cushion and prevent
movement in the container.
To prevent damage during shipment in particular protect the front panel.
Seal the shipping container securely.
Mark the shipping container FRAGILE to encourage careful handling.
Use a clean, dry, non-abrasive cloth for external cleaning of the equipment.
To clean the equipment do not use any solvent, thinner, turpentine,
acid, acetone or similar matter to avoid damage to external plastic or
surfaces.
pertinent
to initial inspection,
-10° to +40° C
< 90% relative
-20° to + 70° C
< 95% relative
Installation
power
2-1
Advertisement
