Advertisement
Quick Links
Provided by:
http://www.narda-sts.it
Advanced Test
®
Equipment Rentals
Sales & Support:
NARDA
Via Leonardo da Vinci, 21/23
Safety
20090 Segrate (MI) -
Test
Tel.: +39 02 2699871
Solutions
Fax: +39 02 26998700
S.r.l. Socio Unico
User's Manual
PMM SB-10
SWITCHING CONTROL BOX
SERIAL NUMBER OF THE INSTRUMENT
You can find the Serial Number in a side of the box.
Serial Number is in the form : 0000X00000.
The first four digits and the letter are the Serial Number prefix, the last five digits are
the Serial Number suffix. The prefix is the same for identical instruments, it changes
only when a configuration change is made to the instrument.
The suffix is different for each instrument.
Document SB10EN-30406-1.00 – Copyright © NARDA 2013
www.atecorp.com
(800) 404-ATEC
Manufacturing Plant:
Via Benessea, 29/B
17035 Cisano sul Neva (SV)
ITALY
Tel.: +39 0182 58641
Fax: +39 0182 586400
Advertisement
Summary of Contents for NARDA PMM SB-10
- Page 1 The first four digits and the letter are the Serial Number prefix, the last five digits are the Serial Number suffix. The prefix is the same for identical instruments, it changes only when a configuration change is made to the instrument. The suffix is different for each instrument. Document SB10EN-30406-1.00 – Copyright © NARDA 2013...
- Page 2 Union (2002/96/EC) and belongs to Category 9 (Monitoring and Control Instruments). You can return the instrument to us free of charge for proper environment friendly disposal. You can obtain further information from your local NARDA Sales Partner or by visiting our website at www.narda-sts.it .
- Page 3 Contents Page Safety requirements and instructions…………………………….. EC Conformity certificate……………………………………………. 1 General information Page 1.1 Documentation…............... 1.2 Introduction to the PMM SB-10…………........1.3 Standard Accessories………………………………………………. 1.4 Main specification…..............1.5 Optional Accessories……………..……........ 1.6 Front Panel……………………….…........... 1.7 Rear Panel…………………………..........2 Installation and use Page 2.1 Introduction.................
- Page 4 Figures Figure Page PMM SB-10 front panel……..…......... PMM SB-10 rear panel……………........Single SB-10 installation example…………………………. Multiple SB-10 installation example……………………….. Tables Table Page PMM SB-10 Technical specifications....... Contents...
- Page 5 Ground connections must not be interrupted intentionally; To prevent the possible danger of electrocution, do not remove any covers, panels or guards installed on the device, and refer only to NARDA Service Centers if maintenance should be necessary;...
- Page 6 E C C o n f o r m i t y C e r t i f i c a t e (in accordance with the directives: EMC 89/336/EEC and low voltage 73/23/EEC) This is to certify that the product: PMM SB-10 Switching Control Box Produced by: Narda Safety Test Solutions S.r.l.
- Page 7 SB-10 to connect up to 50 remote devices. The PMM SB-10 is powered by an External DC supply or by a PC with apposite USB A or B type cable. With the USB is possible to supply only up to three SB-10 (30 remote devices).
- Page 8 80 m long Optical fiber connection Up to ten devices connected via optical fiber, expandable up to Connections five PMM SB-10 for a total of 50 measuring devices connected. Via RS-232 serial port for remote operation and firmware update.
- Page 9 1.6 Front panels Fig. 1-1 Front panel Legend: 1. On Led ; 2. Device-1 Fiber optic connector; 3. Device-2 Fiber optic connector; 4. Device-3 Fiber optic connector; 5. Device-4 Fiber optic connector; 6. Device-5 Fiber optic connector; 7. Device-6 Fiber optic connector; 8.
- Page 10 This page has been left blank intentionally General Information...
- Page 11 2.3 Packing and check list enclosed with the Operating Manual. Unpacking Notify any damage to the forwarder personnel as well as to your NARDA Representative. To avoid further damage, do not turn on the instrument when there are signs of shipping damage to any portion of it.
- Page 12 The PMM SB-10 Switching Control Box can function together with several 2.7 PMM SB-10 NARDA isotropic probes with a wide frequency and level operating range. Installation and use The following figure shows an example of SB-10 interconnection: Fig. 2-1 Single SB-10 installation Fig.
- Page 13 The External DC supply can be connected to either of them. The supply voltage is propagated between boxes by the Extension Cable. To power on or off the PMM SB-10 operate the ON-OFF push button on the rear panel. Installation...
- Page 14 This page has been left blank intentionally Installation...
- Page 15 Switching Control Box and the PMM OR03 Optical Repeater. When several PMM OR03 Optical Repeater with probe are connected to the PMM SB-10 each of them need to be set with a different address. With the PMM SET ADDRESS Utility you can associate an address at each Optical Repeater connected to the PMM SB-10.
- Page 16 3.3 Hardware installation The PMM SB-10 Switching Control Box works in conjunction with various device in a wide range of frequencies and levels. The examples in the Chapter 2 show the connection of PMM SB10 with Personal Computer, PMM OR03 Programmable Optical Repeater and its probes, and PMM EP600/601/602/603.
- Page 17 Once the connection is established, the utility starts to recognize the device 3.6 To use the software and the probe connected to the PMM SB-10. If the probe is not connected to the device, the utility shows the message “Probe missing”:...
- Page 18 Once the connection is established, the utility starts to check and calibrate each axis: At the end of the process, the software shows the Release and Date of the device connected to the SB-10. The default address of each device is 00 and the utility will show the message “ADDRESS received 00”.
- Page 19 Moreover, we are continuously improving our quality, but we know this is a never ending process. We would be glad if our present efforts are pleasing you. Should one of your pieces of NARDA equipment need servicing you can help us serve you more effectively filling out this card and enclosing it with the product.
- Page 20 Suggerimenti / Commenti / Note: Suggestions / Comments / Note:...