Installation Procedures:
Operation Steps:
The PIM comes with two preprogrammed maps. Map 1 is
when the motorcycle has a Yoshimura slip-on system
with spark arrester installed. Map 2 is when the
motorcycle has a Yoshimura full exhaust system with
spark arrester installed.
Use the map selector plug to switch between maps. Map
1 is active when the selector plug is connected (Fig. 14).
Map 2 is active while the selector plug is disconnected
(Fig. 15).
NOTE: Before connecting the map selector plug remove
the map selector plug cover (Fig. 15).
Map 1
is active
Map 2
is active
Map
selector
plug cover
Page 5
Fig. 14
Fig. 15