JA
3 FUNCTION INTRODUCTION
EN
6.4 Unknown Format
This function allows you to select if you want to copy the unknown format
CT
area.
6.4.1 Copy unknown
Copy all the unknown area if device can not identify the format during copy.
6.4.2 Skip unknown
Skip the unknown area if device can not identify the format during copy.
6.5 Transfer Rate
You can select the best transfer rate from UDMA 2 to UDMA7 for your
HDD duplication progress. If you are not confident on the HDD quality or
you find a high failure rate on copy or compare. It is recommended to slow
down the UDMA mode.
6.6 Erase Pattern
Select different erase method.
35
〈KD25/35MS2〉
14
先頭ページへ