Advertisement
Function
Description
To copy source HDD to multiple target HDDs. Refer to function 6.Setup for 3 different copy mode
1. Copy
selection.
2. Compare
To compare data bit by bit between source and copied HDDs.
3. Copy+Compare
It makes copy first and then compare copied HDD with source HDD to ensure data correctness.
4.1 Quick Erase
Erase HDD's index table only, it takes short time to execute this function.
4.2 Full Erase
Erase the whole HDD content.
4. Erase
Note: Function 6.3 can select to
4.3 DoD erase
erase source HDD or not
Erase HDDs three times complying with USA Department of Defense (DoD) standard.
4.4 DoD EraseComp
Erase HDDs three times complying with n USA Department of Defense (DoD) standard and bit by
bit to check if data is completely erased.
5.1 Show HDD info
Shows HDD's basic information such as HDD model name and capacity.
5.2 Update System
5. Utility
5.3 System Info
This function will show information of the duplicator system, including controller model number
and software version.
FUNCTION TABLE 2
5.2.1 Update BIOS
To update the system firmware via the HDD.
5.2.2 Format HDD
To format the HDD with a 2GB FAT partition in order to
quickly save firmware in the HDD.
5
先頭ページへ
26
〈KD25/35MS2〉
JA
EN
CT
Advertisement
Chapters
