Table of Contents
Advertisement
Getting started
Telephone base installation
Install the telephone base as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a DSL filter between the
telephone line cord and telephone wall jack. The filter prevents noise and
caller ID problems caused by DSL interference. Contact your DSL service
provider for more information about DSL filters.
Telephone
wall jack
DSL filter (not included) is
required if you have DSL
high-speed Internet service
•
Use only the power adapter supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
•
The power adapter is intended to be correctly oriented in a vertical or
floor mount position. The prongs are not designed to hold the plug in
place if it is plugged into a ceiling, under-the-table or cabinet outlet.
Wall mounting
Your telephone comes ready for tabletop use. If you prefer to mount your
telephone on the wall (optional), it is designed to mount on a standard
telephone wall plate.
You can mount the telephone base on the wall by positioning the
top hole at the back of the telephone
base against the top mounting
stud [A]. Then slide the telephone
base down on the mounting
studs [A] and [B] until it locks
into place.
Telephone
line cord
Mounting
studs
Telephone base
[A]
[B]
2
Electrical outlet
(not controlled
by a wall switch)
Telephone base
power adapter
Telephone base
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DECT 6.0 CS6114 and is the answer not in the manual?
Questions and answers
change number of rings
How do you record a new outgoing message? The model that I have uses this feature as well as the ability to take messages. DECT6.0
How can I get a replacement A/C power cord for this phone
You can obtain a replacement A/C power cord for the VTech DECT 6.0 CS6114 phone by visiting www.vtechphones.com or calling 1 (800) 595-9511. In Canada, visit www.vtechcanada.com or call 1 (800) 267-7377.
This answer is automatically generated
Handset reads Out of range or no power at base. Both are working at the base no sync
To fix the "Out of range or no power at base" issue on your VTech DECT 6.0 CS6114 handset:
1. Move the handset closer to the telephone base.
2. Ensure the telephone base has power by checking the power adapter connection.
3. If a call does not connect well, move closer to the base and press /FLASH to answer.
4. If interference occurs during a call, move closer to the base to improve reception.
This answer is automatically generated
How do I block voicemail option?
The manual does not provide instructions on blocking the voicemail option. You may need to contact your telephone service provider for assistance in disabling voicemail services.
This answer is automatically generated
I have deleted all messages. I now want to delete the call history in the phone. How do I do this? Thank you.
To delete the call history on a VTech DECT 6.0 CS6114 phone:
1. Press MENU/SELECT when the handset is not in use.
2. Press CID or ▲/▼ to select Call log.
3. Press MENU/SELECT, then press CID or ▲/▼ to select Del all calls.
4. Press MENU/SELECT to confirm.
5. The screen will display Deleting..., and you will hear a confirmation tone.
This answer is automatically generated
How do I view missed calls while on the phone or how to direct call waiting to voice mail?
How can I make the LCD display brighter?
How to change number of rings on phone