Advertisement
1. As Figure 10 shows, when Roof cover is over top of Frame assembly (see Figure 10)
2. As Figure 12 shows, align one side of Roof cover evenly front to back, add band(No.30) for tie down ratchet at
each point alone the cover opening, Put band for tie down ratchets over cover tension tubes at each base plate
alone one side. Bands do not attach to tension tubes, but loop around and secure at both ends on ratchet.
3. The roof cover is tension ed frond front to back by the rope lacing to grommet flaps inside the main cover, inside
the unit at both front and rear arches. using the rope provided, lace the main cover grommet flap around the main
frame front and rear arch pieces. start in the top middle of each arch, and lace to each side. add rope length by tying
pieces together or cutting as necessary.
Figure 11
Figure 12
Advertisement
