Volvo XC90 Owner's Manual page 248

10 Audio
Audio system controls
Setting
10
Balance between
the front and rear
speakers
Bass speaker level
Center speaker level
Surround sound
level
SURROUND MODE
Surround sound settings are used to balance
sound levels throughout the vehicle. Surround
settings for the various sound sources are
made separately.
There are three settings for surround sound.
•
PRO LOGIC II
•
3-CHANNEL
•
OFF (2-channel stereo)
The symbol in the display indicates that
Dolby Surround Pro Logic II is activated.
*
248
Option/accessory, for more information, see Introduction.
•
Dolby Surround Pro Logic II functions in
Shown in the dis-
CD mode only.
play
•
2-channel stereo is recommended for AM/
FADER FM radio broadcasts.
•
Dolby Surround Pro Logic II is only availa-
ble on the highest level audio system –
Premium Sound.
SUBWOOFER
*
Use the following instructions to select PRO
CENTER (Premium
LOGIC II, 3-CHANNEL, or to turn these func-
Sound system only)
tions off. See also the menu structure on page
264.
SURROUND
(Pre-
1. Select
mium Sound system
press ENTER.
only)
2. Select
ENTER.
3. Select
OFF
4. The symbol
Pro Logic II is selected.
5.
3-CH
is selected.
6. OFF
Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing Cor-
poration.
"Dolby Surround Pro Logic II", and the double-
D symbol are trademarks of Dolby Laborato-
AUDIO SETTINGS in the menu and
CD SURROUND and press
PRO LOGIC II, 3-CHANNEL , or
and press ENTER.
PL II is displayed when
is displayed when 3-channel stereo
indicates normal stereo mode.
ries Licensing Corporation. Dolby Surround
Pro Logic II is manufactured under licence from
Dolby Laboratories Licensing Corporation.
Bass speaker – SUBWOOFER*
The subwoofer helps the system provide fuller
sound and deeper bass.
1. Select AUDIO SETTINGS in the menu and
press ENTER.
2. Select SUBWOOFER and press ENTER.
See page 247 for information on setting the
subwoofer level.
Equalizer FR
EQ – FRONT (certain audio systems)
This function is used to fine-tune the sound
from the front speakers.
1. Select AUDIO SETTINGS in the menu and
press ENTER .
2. Select Equalizer FR and press ENTER.
3. Use the menu selection buttons to set the
level or use the SELECTOR control.
4. Press ENTER to select the next frequency.
You can select five frequencies.
5. Press ENTER until you come to the menu
mode to save the changes you have made.