Table of Contents
Advertisement
Listening to Bluetooth enabled devices
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication
This sound bar supports the following:
Bluetooth
Notes when using unit with a mobile phone
●
This unit cannot be used to talk over the
telephone even when there is a Bluetooth
●
Please refer to the operating manual supplied
with the mobile phone for details on operation of
your mobile phone while transmitting the sound
using a Bluetooth
■ Pairing Bluetooth devices
Bluetooth
not necessary to pair them again unless:
●
●
●
On indicators
Status
Unconnected
Blinks
Pairing mode
Blinks quickly
Bluetooth Specification
E-17
■ Pairing with other Bluetooth
source device
1
Press the ON/STANDBY button to turn the
power on.
2
Press the INPUT button to select Bluetooth func-
tion. (PAIRING indicator blinks.)
3
Press and hold the PAIRING button for 3 sec-
onds or more.
now in pairing mode and is ready to be paired with
other Bluetooth
4
Perform pairing procedure on the source device
to detect this sound bar. "HT-SB30D SHARP"
will appear in the detected devices list (if avail-
able) in the source device. (Refer the source
device operating manual for details).
Notes:
●
●
Some source devices are unable to display lists of
5
Select "HT-SB30D SHARP" from the source list.
If Passcode* is required, enter "0000".
6
Pairing indicator (blue) will stop blinking once
the sound bar is successfully paired with the
source device. (Pairing information is now
memorized in the sound bar.)
Some audio source devices may connect with the
otherwise follow the instructions in the source device
7
Press the play button on remote control or
source device to start Bluetooth streaming
playback.
-
Advertisement
Table of Contents
