Beko HTV 8736 XC0M User Manual page 34

Make sure that your smart device is
connected to internet to download the app.
If you are using the app for the first time,
please follow the on-screen instructions
to complete the user registration process.
Once the registration is complete, you
can use all products with the HomeWhiz
feature in your house on this account.
On the HomeWhiz app, you can tap
"Add/Remove Appliance" to see the
products paired with your account. You
can pair these products on this page.
C
INFORMATION
• To be able to use the HomeWhiz function,
make sure that the app is installed on
your smart device and that your washing
machine is paired with your smart
device via Bluetooth. If the washing
machine is not paired with your smart
device, it will function as an appliance
without the HomeWhiz feature.
• Your product will run once it is paired with
your smart device via Bluetooth. Controls
made from the app will be enabled through
this pairing. For this reason, the Bluetooth
signal between the product and the
smart device must be strong enough.
• Please visit www.homewhiz.com to see
the Android and iOS versions supported
by the HomeWhiz application.
A
WARNING!
• All the safety measures described in
"GENERAL SAFETY INSTRUCTIONS"
section of your user manual apply
to remote control through the
HomeWhiz function as well.
5.21.1 HomeWhiz Setup
Your product and the HomeWhiz app
must be connected for the app to run. To
establish this connection, please follow
the steps below for setup both on your
product and on the HomeWhiz App.
• If you are adding an appliance for the first
time, tap "Add/Remove Appliance" on the
HomeWhiz App. Then tap "Tap here to
setup new appliance". Follow the steps
below as well as the instructions on the
HomeWhiz App to complete the setup.
34 / EN
• To start the setup process, make sure that your
machine is switched off. Press and hold the
Temperature button and the Remote Control
Function button simultaneously for 3 seconds to
switch your machine to HomeWhiz setup mode.
• While the device is in HomeWhiz setup mode,
you will see an animation on the display,
and the Bluetooth icon will flash until the
machine is paired with your smart device.
In this mode, only the programme button
is enabled. Other buttons are disabled.
• On the screen of the app, select the
desired washing machine and tap Next.
• Follow on-screen instructions until the
HomeWhiz app asks you about the product
you wish to connect to your smart device.
• Return to the HomeWhiz app and wait until
the setup is complete. Once the setup is
complete, give your washing machine a name.
You can now tap the screen to see the product
you have added to the HomeWhiz App.
C
INFORMATION
• If you cannot complete the setup
successfully in 5 minutes, the washing
machine will switch off automatically. In this
case, you will have to start over the setup
procedure. If the problem persists, please
contact the Authorised Service Agent.
• You can use your washing machine with
more than one smart device. To do this,
download the HomeWhiz app on the other
smart device as well. After launching the
app, you will need to sign in to your account
you have previously created and paired with
your washing machine. Otherwise, please
read "Setting up a washing machine that
is connected to someone else's account".
Washer-Dryer / User's Manual