Starting The Programme; Loading Door Lock - Beko HTV 8736 XC0M User Manual

5.15 Starting the programme

1. Press the Start/Pause button
to start the programme.
2. The flashing light of the Start/Pause
button will remain on, indicating that
the programme has started.
3. Loading door will be locked. When
the door is being locked, "Locking
Door" warning will be displayed.

5.16 Loading door lock

There is a locking system on the loading
door of the machine that prevents opening
of the loading door when the water
level is unsuitable to open the door.
"Loading door locked" light on the panel
turns on when the loading door is locked.
C
INFORMATION
• The door will be locked if the Remote
Control function is selected. To open the
door, you need to press the Remote Control
key or change the programme position to
deactivate the Remote Control function.
Opening the loading door in
case of power failure:
C
INFORMATION
• In case of a power failure, you can
use the loading door emergency
handle under the pump filter lid to
manually open the loading door.
A
WARNING!
• Before opening the loading door,
make sure that there is no water in
the machine to avoid flooding.
32 / EN
• Open the pump filter lid.
• Release the loading door emergency
handle at the back of the filter lid.
• Pull down the loading door emergency
handle to open the loading door. After
opening the door, return the emergency
handle to its original position.
• If you cannot open the loading door,
try pulling down the handle again.
5.17 Changing the selections
after programme has started
5.17.1 Adding laundry after the
programme has started
When you press the Start/Pause button, the
"Loading door locked" light on the panel will go
off if the water level in the machine is suitable.
If the water level in the machine is not suitable
when you press the Start/Pause button, the
panel will warn you that the door is closed.
:
Washer-Dryer / User's Manual