Adjusting Soft Chain Making Mechanism; Replacing· The Parts With Those Exclusively Designed For Making Soft Chains; Adjustment Value - JUKI MO-6000G Series Engineer's Manual

I
I
i i
1·
.I
~
Standard Adjustment
(39) Adjusting soft chain making mechanism
1) Replacing the parts
with
those exclusively designed for making soft chains
8
Needle thread presser p1ate
C ....... 12112504 f)
8
Driving cam .................................... 12112603
8
Needle thread presser spring B .•... 12112702
· 8
Throat plate .................................... {only for 1-needle
overlock machine)
0D4·3O0 ......................................... R4200J6OO0A
2) Adjustment value
CD
Needle
thread
guide and needle thread
take-up lever
Adjust the
needle
thread guide
to increase the
needle
thread
feeding
amount
when
the
needle
bar
is In the
lowest dead point of its stroke.
Needle thread take-
up amount when the
needle bar is
in its
lowest dead point
3,l fo35/
· mrn
(04 1-needle overlock
machine)
Needle thread
take-
up amount when the
needle bar is in its
/ lowest dead point
2.5
f03,n,n
(16 Safely stitch machine)
®
Adjust
the rising
amount
of
needle
thread presser plate C.
Adjust the
rising
amount of needle thread presser plate C
8
to 0.6 to 1 mm {max.)
by
moving
driving cam
8
to the right and left
within
the slot.
Rising amount : 0.6 to 1 mm {max.)
•
-64-