Table of Contents
Advertisement
OperatingInstructions
R
Animal Repeller AT118
1.Charge the machine. Plug the charger connector into the
www.aetertek.com
charging port. The RED LED light will light up with a beep sound. When
charging is done, the BLUE LED light will be turned on. Please unplug it if fully
charged.
Tip 1: Recommend to charge the machine up to 3 hours for the first few times.
2. Press and hold the on/off button for 1 second, it will be turned on with a
beep and red LED lights up. The red light will start to flashing which means it
projecting ultrasonic waves now. Push on/off button again, it will be off.
3. You can switch it to auto mode by short pressing F/A button with blue LED
light flashing. In auto mode, when the device detects excessive animal barking
or sound, it will emit the frequency automatically and may harmlessly deter the
approach of an animal. Pressing F/A button again can turn off auto mode.
-03-
Advertisement
Table of Contents
Need help?
Do you have a question about the AT-118 and is the answer not in the manual?
Questions and answers