Volvo V70R Owner's Manual page 143

Starting and driving
Adjusting headlamp pattern
Location of Bi-Xenon headlamp masks, 1 and 2 = LHD variant, 3 and 4 = RHD variant
Headlamp masking
Copy the templates and transfer the pattern
to a self-adhesive, waterproof material such
as opaque tape or the like.
The mask is positioned using the dot (5) in
the headlamp lens as a reference point. The
reference measurement (X) indicates the dis-
tance from the dot (5) to the corner of the
mask.
After copying the templates located on the
next page, check the measurements so that
the reference measurements cover enough of
the beam pattern.
142
Bi-Xenon headlamps, LHD
variant
Copy templates 1 and 2. Check the measure-
ments to ensure they are correct. Transfer the
template to a self-adhesive, waterproof mate-
rial and cut it out.
Reference measurements:
Template 1. (3) = 56 mm, (4) = 43 mm
Distance to dot in headlamp lens:
(5) = 29 mm.
Template 2. (6) = 56 mm, (7) = 42 mm
Distance to dot in headlamp lens:
(8) = 6 mm.
Bi-Xenon headlamps, RHD
variant
Copy templates 3 and 4. Check the measure-
ments to ensure they are correct. Transfer the
template to a self-adhesive, waterproof mate-
rial and cut it out.
Reference measurements:
Template 3. (1) = 56 mm, (2) = 42 mm
Distance to dot in headlamp lens:
(5) = 29 mm.
Template 4. (6) = 56 mm, (7) = 41 mm
Distance to dot in headlamp lens:
(8) = 0 mm.