Powersaver; Table 1-2. Power-Saving Modes - Dell 1700 User Manual

1700FP-E.book Page 12 Monday, November 2, 1998 4:51 PM

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system
saves energy by switching your monitor into a low-power mode when it has not been used
for a certain amount of time. The available modes are "On" , "Standby" , "Sleep" , and "Deep
Sleep" .
This system operates with a VESA DPMS compliant video card installed in your computer.
You use a software utility installed on your computer to set up this feature. See Table 1-2
below for details.

Table 1-2. Power-saving modes

State
Horizontal Sync
Vertical Sync
Video
Power
Indicator
Power
Consumption
NOTE: This monitor automatically returns to normal operation when horizontal
and vertical sync return. This occurs when you move the computer's mouse or
press a key on the keyboard.
This monitor is EPA E
puter equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
®
1-12 Dell 1700 Flat Panel Monitor User's Guide
Power-Saving Function Mode (EPA/NUTEK)
Normal Standby
Operation Mode
Active Inactive
Active Active
Active Blanked
Green Amber
50W (max.) Less than
45W (nominal) 5W
®
S compliant and NUTEK compliant when used with a com-
NERGY TAR
Deep Sleep
Sleep Mode Mode
Position A1 Position A2
Active Inactive
Inactive Inactive
Blanked Blanked
Green/Amber Amber
Blinking Blinking
(0.5 sec interval) (1 sec interval)
Less than Less than
5W 5W