Connect Bluetooth Devices; Connecting Coaxial Equipment; I2S Interface Definition Diagram; Mx-Pro Audio Switchings - JF Digital MX Series Manual

2.2 Connect Bluetooth devices

1. On the home screen, open the app list
2. On the Settings tab, click Wireless & networks > Turn on Bluetooth on the
Bluetooth button.
3. The player will search for Bluetooth devices and list the available devices list.
4. Click on the Bluetooth device you want to connect to, the connection is completed
when the connection is displayed.
If you want to cancel the connected Bluetooth device, click on the connected Bluetooth
device, a pop-up will appear prompting you to disconnect, click OK to disconnect.
Note: MX- Pro , MX-1A, MX-
connected!
You need to connect Bluetooth speakers or a headphone to play music.
2.3 Connecting coaxial equipment (not MX-2A Pro)
The Coaxial output setting requires the SPDIF Output interface, which must be turned
on before the Coaxial output can be used.
1. On the home screen, open the app list
2. Choose the All Settings tab, click Device > Sound;
3. Turn on the S/PDIF Output switch.
• Turn off the S/PDIF Output switch when the I2S output is required,otherwise the I2S
output will be affected.
• When using the Coaxial output, unplug the USB2/Audio output connector.
、
2.4 I2S interface definition diagram (not MX-2A Pro)
Note: I S cannot output a signal when the S/PDIF Output switch is turned on. The
2
S/PDIF Output switch needs to be turned off at first.
2.5、MX-Pro Audio switchings(Firmware version 1.06 or above)
From firmware version 1.06 the software control output is added, and when the whole
cable is no longer plugged in at the same time, the USB blocks the other outputs;
In the „Settings – Sound - USB Audio Select" (internal/external) option feature:
Off: (default setting): The USB audio output is turned on,
The coaxial, the fiber, the balance port audio outputs are turned off;
2A Pro and mobile phones are both hosts and cannot be
，click to set
，click to set
.
.