Packing Instructions; Safety Notice - JF Digital MX Series Manual

Packing Instructions

In the event it is necessary to repack the equipment for shipment, the equipment must be
packed exactly as shown below. It is very important that the four feet are attached to the
bottom of the equipment. This will ensure the proper equipment location on the bottom
foam pad. Failure to do this will result in shipping damage.
To protect the tubes during shipment, the Foam Insert removed from the amplifier needs
to be re-inserted. Follow the unpacking instructions on previous page.
Use the original shipping carton and interior parts only if they are all in good serviceable
condition. If a shipping carton or any of the interior part(s) are needed, please call or write
Customer Service Department.
IMPORTANT SAFETYNOTICE
PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT.
WARNIG
Please turn off the unit, cut off power supply, and pull off the plug from socket while have
following cases, and inform dealer or repair department.
·With smoke from, special burntsmell or special sound from.
·
Water inside.
·
Some metal drop in.
·
No sound while at play status.
·
Drop down from and case damage.
·Do not put the vast on top o the unit
Water will cause shorting and damage.
·Do not let metal drop in the unit
Metal piece drop in from the vent or tray will damage
the circuit or cause fire.
·Do not put the unit near the wall or other object
Heat will cause fire or damage of the object.
·Do not discrew the cover
No useful parts inside or will cause shorting.
·Do not damage the power supplying line
Do not put object on power line, do not curd powerline or
over pull, do not put near the neater as warmeror electric
stove.