Servpro HVE3000 Owner's Manual

HVE3000 Flood Pumper and Inline Booster
The high-efficiency HVE3000 can be used both as a flood pumper to quickly remove excess
liquid water for flood remediation and as an inline truckmount booster to extend the
effective vacuum hose length for carpet extraction and cleaning.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
SAFETY INSTRUCTIONS
WARNING
WARNING! Do not alter or modify your HVE3000 in
any way. Use only replacement parts authorized by
Sapphire Scientific, Inc. Modifications or use of
unapproved parts could create a hazard and will
void your warranty. Contact your authorized
Sapphire distributor for assistance.
WARNING! Do not operate unit in standing water.
Electric shock hazard. Unit must be grounded.
WARNING! Unit must be grounded.
• Keep motor and wiring dry. Keep out of standing
water and do not install in area likely to be subject to
water intrusion. Do not expose to rain, water or
snow.
• Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong.
• Do not use an extension cord.
• To reduce the risk of fire or electric shock, do not
use this unit with any solid-state speed control
device.
FIRE HAZARD
• Keep away from open flames and heat sources.
• Do not use or store where vapors from gasoline,
solvents, thinners or other flammable materials may
be present.
SP004 HVE3000
Owner's Manual
Manufactured by Sapphire Scientific for Servpro Industries, Inc.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 www.SapphireScientific.com
Patents: http://www.LBpatents.com
#633 - 115V
WARNING! Unplug unit before cleaning or servicing.
• Turn off unit and unplug before lifting or moving.
• Handle the unit carefully. Always operate the unit on
a stable, level surface. Do not drop, throw, or place
where it could fall. Rough treatment can damage the
unit, and may create a hazardous condition or void
the warranty.
• Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
• The unit must be operated on a 115V/60 Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Do not attempt to repair the unit. For authorized
service options, contact SERVPRO
Department at 866-885-6833 or email
rma@servpronet.com.
BEFORE YOU BEGIN
Warranty registration
To process a warranty or repair claim, just click the
"RMA/ Warranty Form" listed under the "Products" tab
on the ServproNET
Equipment page on ServproNET.
You may contact the SERVPRO
phone at 866-885-6833 or via email at
rma@servpronet.com.
To expedite the warranty claim process, please have the
following:
•
Equipment model number.
•
Serial number.
•
Usage hours (if applicable).
When Franchises purchase equipment from Servpro
Industries, Inc. unit date of purchase and serial numbers
are recorded on the invoice. As part of the Servpro
Industries, Inc. RMA/Warranty program, proof of
purchase and equipment warranty records are added to
1
®
RMA
®
home page or it is also found at the
®
RMA Department by
Dri-Eaz Products, Inc.