Toro CM-658H-S Operator's Manual page 6

Maintenance and Storage
•
Before performing maintenance, do the following:
– Park the machine on level ground.
– Stop the engine. Wait for all movement to stop before
adjusting, cleaning, or repairing.
– Let the engine cool before performing maintenance
or storing.
– Disengage all power and operation controls.
•
Never lubricate, service, repair, or adjust the machine
while it is running.
•
Keep equipment materials clear from the muffler and
engine to help prevent fires. Clean up any oil or fuel
spillage.
•
Never allow untrained personnel to service the machine.
•
Keep hands, feet, and clothing away from moving parts.
If possible, do not make adjustments with the engine
running.
•
Keep all parts in good working condition and all hardware
tightened. Replace all worn or damaged decals.
•
Remove any buildup of grease, oil, or debris from the
machine.
•
Stop and inspect the machine if a foreign object enters the
drum or causes another obstruction. Make any necessary
repairs before starting the machine.
•
Do not tamper with safety devices.
•
Chock the tires when storing the machine.
•
Keep all nuts, bolts, screws, and hose clamps securely
tightened. Keep equipment in good condition.
•
Use only genuine Toro replacement parts to ensure that
the original standards are maintained.
6