Belt Maintenance - Toro FP Series Operator's Manual

Changing the Eccentric Oil
Service Interval: Every 300 hours
1. Set the throttle to slow, stop the engine, and wait for
all moving parts to stop.
2. Place an oil drain pan under the oil plug and remove
the fill plug and the oil plug screw (Figure 23).
3. Tip the plate compactor forward slightly and use a
suction gun to remove the oil through the filler hole
(Figure 23).
4. Slowly pour oil into the filler hole until the oil comes
out the oil plug (Figure 23).
5. Wipe up any spilled oil.
6. Replace the fill plug and the oil plug screw.

Belt Maintenance

Removing the Belt Cover
1. Remove the flanged-head bolts that secure the belt
cover to the engine (Figure 24 or Figure 25).
1. Bolt locations
Model 3000/4000
1. Bolt locations
2. Remove the belt cover.
16
Figure 24
Model 2200
2. Flanged-head bolt
Figure 25
2. Flanged-head bolt