Safety Decals; Specifications - Toro Sitework 22447 Operator's Manual

Trencher, systems attachment
Table of Contents

Advertisement

DANGER
POTENTIAL HAZARD
Contact with moving teeth and auger may
cause injury.
WHAT CAN HAPPEN
Moving teeth and auger can cut hands, feet or
other body parts.
HOW TO AVOID THE HAZARD
Keep away from the moving teeth and auger
while operating the trencher.
Keep your hands, feet, and any other part of
your body or clothing away from moving parts.
Before adjusting, cleaning, repairing and
inspecting the trencher, shut off the engine and
wait for all moving parts to stop. Lower the
trencher and loader arms to the ground and
rotate the ignition key to "OFF." Remove the
key.

Safety Decals

2
1
1. Cutting auger, keep clear
2. Cutting chain, keep clear
3. Stay away from moving parts

Specifications

Width
Length
Height
Weight (without chain)
Drive type
Motor displacement
Drive ratio
Chain speed (3600 engine RPM)
4
3
5
# 99–9952
4. Keep bystanders away from
the work area
5. Safety alert symbol
39 inches (100 cm)
65 inches (165 cm)
24 inches (60 cm)
375 lbs (170 Kg)
Planetary gearbox
3
5.9 in
/rev (102 cm
3.44:1
116 RPM at 10 o'clock position
POTENTIAL HAZARD
When the engine is off, attachments in the
raised position can gradually lower.
WHAT CAN HAPPEN
Someone nearby may be pinned or injured by
the attachment as it lowers.
HOW TO AVOID THE HAZARD
Always lower the attachment lift each time you
shut off the traction unit.
6
7
Figure 1
6. Shut of engine and remove
key before performing
maintenance or repair work
7. Explosion hazard
3
/rev)
3
WARNING
7
9
8
# 99–9953
8. Electric shock hazard
9. Do not dig in areas with
buried gas or power lines
8
9

Advertisement

Table of Contents
loading

Table of Contents