Manual Wired Network Setup - Samsung F6400 Series E-Manual

Manual Wired Network Setup

(The pictures may vary depending on the models)
If the network requires a static IP address, enter the IP address, subnet mask, gateway and DNS values
to connect to the network manually. To get the IP address, subnet mask, gateway and DNS values,
contact your Internet Service Provider (ISP). Refer to the Dynamic versus Static IP Addresses for more
information.
11
Set Network Type
Select your network type.
Network Type
21
Select Stop when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Connection verification cancelled.
Wired network connection test stopped.
Change Network
to Wired and then select Connect.
Network Settings
Wired
Connect
IP Settings.
Network Settings
IP Settings Retry
Plug a network cable into
the back of your TV.
Close