LG T2727S0Z User Manual page 81

• Connect the cold water valve (blue) to the cold side (blue), and the hot water valve (orange) to the hot side
(orange) on the faucet.
- Do not connect hot water alone. It may damage the clothes.
- Make sure that the cold and hot water hose are mixed up.
• If there is only 1 faucet, connect to cold water side (blue).
• Connect matching to the shape of the hose.
General type faucet
1
Connect a connector to a faucet.
▶ Place a rubber packing tightly
on a faucet, and tighten
4 screws to the same depth.
▶ Face the large head set
screw to the wall to
tighten more easily. .
2
Connect a Intermediate connector to a connector.
▶ Tighten the Intermediate connector
while turning to right to avoid the
screw thread from dislocating.
Incomplete tightening may
cause electricity leakage.
3
Connect a water supply hose to a connector.
▶ Insert to a Intermediate connector
while pressing down the press
bar and handle.
▶ It connects with 'tick'
clicking sound.
4
Connect a water supply hose to the washer, and
turn on the faucet.
▶ Check the cold water (blue) and hot water (orange)
before connecting.
▶ Connecting without a rubber packing causes electricity
leakage. Check it before connecting.
▶ If water leaks, recheck the connection process from
the beginning and connect again.
Cold water
(blue)
Connector
Push and
insert up
to the
dotted line.
Rubber
Large head
packing
set screw
Connectorctor
Connector
Intermediate
connector
Intermediate
connector
Press handle
Press bar
Hot water
(orange)
Coupling (nipple) type faucet
1
Disassemble the coupling (nipple) of the faucet
▶ Disassemble and remove the
coupling (nipple) on the end
of the faucet (coupling type)
2
Connect the screw type Intermediate
connector to the faucet.
▶ Tighten the Intermediate
connector turning to right
to avoid a screw thread
from dislocating.
Incomplete tightening may
cause electricity leakage.
3
Connect a water supply hose to the
Intermediate connector.
▶ Insert to a Intermediate
connector while pressing
down the press bar and
handle.
▶ It connects with 'tick'
clicking sound.
4
Connect a water supply hose to the washer, and
turn on the faucet.
▶ Check the cold water (blue) and hot water (orange)
before connecting.
▶ Connecting without a rubber packing causes electricity
leakage. Check it before connecting.
▶ If water leaks, recheck the connection process from the
beginning and connect again.
Cold water
(blue)
Coupling
(nipple)
Screw type
Intermediate
connector
Screw type
Intermediate
connector
Press handle
Press bar
Hot water
(orange)
33