LG T2727S0Z User Manual page 80

How to connect water supply hose
• Separate the water supply hose included in the product package before connecting.
• Connect matching to the shape of the hose.
Separate the connector and Intermediate
connector completely, and separate the
water supply hose as well.
Turn the connector to the left to separate it
▶
from the Intermediate connector.
▶ Press down and hold the press bar and the
handle, and pull downward to separate the
water supply hose.
▶ If not separated, it may cause electricity
leakage because it may not tighten when
connecting.
※ Separate only the Intermediate connectors
for the water supply hose of the nipple type
faucet.
◉ If you want a longer water supply hose,
▶ Purchase a separate hose from a LGE store or service
center, and connect to your water supply hose.
▶ If you use only one of hot and cold water supply hoses,
you can connect the unused hose to the connector of
the selected water supply to extend the hose.
◉ If the water temperature is selected other than cold
water, both cold and hot water will be supplied.
If you use only one from hot or cold water, it must be
connected to cold water hose.
▣How to connect other faucets
※ Follow the instructions of the coupling (nipple) type connection described in the next page for the
model with a nipple type water supply hose.
●Nipple type
●Screw type
32
Guide bar
Connector
Intermediate
connector
Press handle
Press bar
① Remove the nipple on the end.
Nipple
① Remove the guide bar inside
the connector.
Guide bar
General type faucet
Large head
set screw
Water supply
hose
Water
supply hose
② Assemble the connector.
② Assemble the connector.
Nipple type faucet
Water
supply hose
Water supply
hose Intermediate
connector
Screw type
Intermediate
connector