Battery Strength Display Feature - Toro TWRS-I User Manual

Wireless rain sensor series

Table of Contents

Signal Strength Display

This feature displays sensor signal strength on a digital scale ranging from 0.0 to 10.2.

1. Press the

Setup button as needed to display the antenna icon and the

digital readout. The display will indicate the strength of the last received

signal. See Figure 22.

Important: A signal strength value less than 2.0 is may cause

inconsistent operation. Relocate the sensor as needed to increase the

signal strength. See "Troubleshooting" on page 22 for additional information.

Battery Strength Display

This feature displays sensor battery strength on a bar scale. The strength of the battery is indicated

by the height of the bar stack: No bar = a dead battery to six bars = full strength.

1. Press the

Setup button as needed to display the

the bar scale. See Figure 23.

Note: If the

Battery icon is flashing, low battery strength is indicated

and replacement is recommended.

See "Sensor Module Battery Replacement" on page 21.

Figure 22

Battery icon and

Figure 23

Table of Contents

Show Quick Links

Table of Contents

Twrfs-i