JET USA CLNSTMJETA1GR User Manual page 3

Portable Steam Cleaner
• Do not use the cords or outlets with
inadequate current load capacity.
• Do not unplug the steam cleaner by
pulling on the cord. To unplug, use
the plug and not the cord.
• Do not handle the plug or steam
cleaner with wet/damp hands.
• If the cord is damaged, have it
replaced by the manufacturer, its
service agent or a qualified person in
order to avoid electrical hazards.
• Do not insert any objects into the
steam cleaner openings. Do not use if
there are any openings that are
blocked.
• Never turn the steam cleaner on its
side for more than 45 degrees in
respect to its vertical axis when using
it. Never direct the flow of steam
towards people, pets, plants and/or
equipment with electrical
components.
• Do not immerse the steam cleaner in
water or other liquids. Always unplug
the power cord from the electrical
socket when filling the steam cleaner.
• Never put descaling, aromatic or
detergent products into the steam
cleaner, as this may damage it or
make it unsafe for use.
• Metal tips on the nozzle will get very
hot during use. Do not touch hot
surfaces. Allow the attachments to
cool down before replacing them
while the steam cleaner is being
used.
• The cover must be locked when using
the steam cleaner.
• Do not use the steam cleaner in or
near swimming pools or anything that
contains water.
• Before filling-up the steam cleaner,
proceed as follows:
• Unplug the power supply.
• Reduce the pressure by pressing
the steam button.
• Allow the steam cleaner to cool
down for three minutes.
• Reduce any built-up pressure
again by pressing the steam
button.
• Slowly unscrew the safety cap
and wait for five seconds before
removing it.
• Do not overfill, otherwise it will
produce a strong pressure that could
affect the production of steam.
E&OE
General Service Information
• Have the equipment serviced or
repaired at authorized service centres
by qualified personnel only.
• Replacement parts must be original
equipment manufacturer (OEM) to
help ensure that equipment safety is
maintained.
• Do not attempt any maintenance or
repair work not described in this
instruction manual.
• After use, the equipment and
components may still be hot – allow
the equipment to cool and disconnect
spark plugs and/or electrical power
sources and/or batteries from it before
making adjustments, changing
accessories or performing repair or
maintenance.
• Do not make adjustments while the
equipment is running.
• Perform all service related activities
under suitable conditions, such as a
workshop etc.
• Replace any worn, damaged or
missing warning labels immediately.
• Do not clean equipment with solvents,
flammable liquids or harsh abrasives.
© 2019 Jet-USA 3