Switching Between; Speakerphone Handset , And Mute - GE 29484 User Manual

U S
SING THE PEAKERPHONE
When the phone rings, the corresponding line's indicator light flashes rapidly.
1. Press the SPEAKER button. The speakerphone comes on
automatically and selects a line.
2. When you are finished, press SPEAKER.
U O
SING THE PTIONAL
CAUTION: Use only the ATLINKS USA, Inc. 5-2425 headset with this
unit. Using other headsets may damage the unit. For information on
ordering the headset, refer to the Connecting an Optional Headset
section of this user's guide.
When the phone rings, the corresponding line's indicator flashes rapidly.
1. Press the line button. If the headset indicator is not blinking, you must
first press the HEADSET button.
2. When you are finished, press the HEADSET button again.
NOTE: Whether you are making or receiving a call, the caller will be
disconnected if you press another line without putting the call on hold first.
S B
WITCHING ETWEEN
H
EADSET
• To switch to the speakerphone, press SPEAKER. The speakerphone
indicator turns on.
• To switch to the handset, pick up the handset. The speakerphone or
headset turns off.
• To switch to the headset, press HEADSET. The headset indicator turns on.
M
UTE
Use the MUTE button to interrupt a phone conversation to talk privately
with someone else in the room. A conversation can be muted with
speakerphone, handset, or headset use.
H
EADSET
U S
SING THE PEAKERPHONE
, H ,
ANDSET AND
13