Special Safety Instructions For This Machine; Using The Machine For The First Time - John Mills BREAD MASTER Instruction And Guarantee Manual

2 General safety Instructions
•
Before commissioning this machine please read the instruction manual carefully.
• Please keep these instructions, the sales receipt and, if possible the packaging.
• The machine is intended exclusively for private and not commercial use.
• Always remove the plug from the socket whenever the machine is not in use and when attaching accessory
parts, cleaning or whenever there is a power failure. Remove the plug not the cable.
• Do not leave children unsupervised close to the appliance. Always make sure that children cannot reach the
machine or any loose cables.
•
Test the machine and the cable regularly for damage. If any damage is found the machine should not be used.
• Do not attempt to repair the machine. Consult an expert.
• For safety reasons, a broken or damaged mains lead may only be replaced by an equivalent lead from the
manufacturer or similarly qualified person.
• Keep the machine and the cable away from heat, direct sunlight, moisture, and sharp edges.
• Use only the original accessories.
• Do not use the machine outdoors.
• Under no circumstances must the device be placed in water or other liquid. Do not use the machine with wet or
moist hands.
• Should the machine become moist or wet, remove the mains plug from the socket immediately. Do not reach into
the water.
• Use the machine only for the intended purpose.
3

Special safety instructions for this machine

• Do not touch any hot elements. Use the handles or knobs provided and oven gloves if necessary.
•
Do not touch any of the moving or spinning parts of the machine.
• Keep a safe distance from other objects.
• Do not cover the machine and do not put anything on it.
4

Using the machine for the first time

Rinse the baking tin and the rest of the equipment. Do not use sharp objects and do not scour. The baking tin
has a non-stick coating. Grease the baking tin and bake empty for 10 minutes. Clean once more and place the
kneading hook on the axle in the baking area.
Electrical connection
The machine must only be connected to a correctly installed 230V 50 Hz safety socket.
A signal is heard "3:00" appears shortly after on the LCD display and the colon between the 3 and 00 remains lit
and does not flash.
The machine is now ready to operate and is automatically set to program "1".
3