Advertisement
LP-N24 V2.0
Quick Installation Guide
In case you select Yes, restore the
LP-N24 V2.0 to its default values
by pressing for 10 seconds the
RESET/WPS button located at
the rear of the equipment. After
that, run the installation software
again.
3
Under Windows 7:
Click Network on the right end of the taskbar to
search your SSID.
NOTE: The default SSID is shown as
LanPro LPN24V2
After connecting to the SSID, continue the
process by following the onscreen instructions.
4
Under Windows XP:
Right click on My Network Places
in your PC and select Properties.
Now you will be assisted by the
basic setup window. Select Ok
to apply the changes.
Configuring your Wireless Network
Right click on Wireless
Network Connection
and select View Available
Wireless Networks.
N24 V2.0
You´re connected to the
Internet!
Locate the SSID and connect.
You´re now authorized to access the
internet wirelessly.
Select your SSID to connect;
Advertisement
