Lanpro LP-N24 V2.0 Quick Installation Manual

Telephone
Cable
ADSL MODEM
Telephone
Cable
NOTE: Before you begin, make sure your computer and modem are turned off. If you're using
Static IP, Dynamic IP or PPPoA other than PPPoE access Internet, refer to the user manual.
1
Connect one end of the telephone cable to the DSL
port on your modem and the other end of the cable
into the spliter.
3
Connect the new cable (not provided in the box) to
one of the 4 LAN on the router, and plug the other
end into your computer.
www.lanpro.com
Connecting your wireless router
Wall outlet
Power
Adapter
Ethernet
Cable
LP-N24 V2.0
Quick Installation
guide
Wall outlet
LP-N24 V2.0
Wireless Broadband Router
2
Connect one end of the Ethernet cable to RJ45 port
of your modem and attach the other end to the WAN
port of the LANPRO LP-N24 V2.0.
4
Complete the process by connecting the power
adapter to the power input of your modem, and plug
the other end into a wall outlet. Do the same
procedure to power up the LP-N24 V2.0.
LPN24V2_IG_ENB01W
Power Adapter
Ethernet
Cable