Part Names And Functions; Flat Surface - Sony Magnescale SR118 Series Instruction Manual

2. Part Names and Functions

2-1. Flat Surface

1 Left and right
brackets
2 Effective movement
length marks
3 Scale center
4 Slider center
5 Model name mark
1 Left and right brackets
These parts support the scale rods and comprise the
scale. The positions indicated in the figure serve as the
reference surfaces when mounting the unit.
2 Effective movement length marks
These marks indicate the effective movement range
standards for the slider with respect to the scale center.
Care should be taken to mount the scale unit properly
so that it is not able to move outside of this range.
Note
Using the scale unit in excess of the effective
movement range may damage the unit.
20
SR118
3 Scale center
This indicates the center of the slider with respect to
the scale.
4 Slider center
This indicates the mechanical center of the slider.
It is also the position for viewing the relationship with
the effective movement length marks of the slider.
5 Model name mark
The model name for this series is inscribed on the
scale unit. See "1-4. System Configuration" for the
model lineup.
6 Connector
This is used to connect the scale unit with a counter
unit. The connector should be a M2-7P connector
(Hirose Co.) or equivalent connector.
6 Connector