Chapter 2 Basic Controls And Connections; Front Panel; Side Button Controls - Vizio E320VP User Manual

VIZIO E320VP User Manual

Chapter 2 Basic Controls and Connections

Front Panel

Remote Control Sensor—Point the remote control directly at
this window on the lower left corner of your HDTV for the best
response to the remote signal.

Side Button Controls

POWER ( )—Turn your HDTV on by pressing the button once. Press the
button again to turn your HDTV off.
MENU—Press to launch the on-screen menu. If a sub-menu is active, this button
will proceed to the next level.
▲ ▼
CH / —Press to change the channels up or down. While the menu is active,
these buttons function as up and down controls.
+ -
VOL / —Press to increase or decrease the speaker volume. While the menu is
active, these buttons function as left and right controls.
INPUT (SELECT)—Press to cycle through the various devices connected to your
TV (called Inputs). The inputs cycle in the following sequence: TV, Comp/AV,
HDMI-1, HDMI-2, RGB, and Media. After you have stepped through the entire
sequence, you will return to the beginning. If a sub-menu is active, pressing this
button will return to the previous menu level. Additionally, when the menu is active,
this button confirms the menu function to be adjusted.
Note: When using an AV (composite) connection, the yellow cable needs to be
connected to the green jack on the side of your HDTV.
www.VIZIO.com
12