Connecting A Pc Computer - Vizio User Manual

2.8 Connecting a PC Computer

computer to the RGB PC Audio (this connection will require a 1/8" stereo mini plug at the end
which goes into the TV) input (blue area) at the rear of the HDTV.
4. Turn on the HDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or side of the HDTV, or directly by
pressing the RGB button on the Remote Control.
Note:
a) For the best picture quality when connecting a pc computer through RGB PC, set your pc
computer timing mode to VESA 1360 x 768 at 60Hz. Please refer to the pc or graphic
card's user guide for additional information on how to set the timing mode and the video
output requirements of the product.
b) A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at
an electronics store.
Version 5/20/2008
VIZIO VX32L HDTV20A User Manual
1.
2.
3.
26
www.VIZIO.com
Turn off the power to the HDTV and
PC Computer.
Connect a 15-pin D-Sub RGB
(VGA) cable to the RGB output of
your pc computer and the other end
to the RGB PC input (blue area) at
the rear of the HDTV.
Connect the Audio Out on your pc