Preparing Your Lcd Hdtv For Wall Mounting; To Remove The Stand Base - Vizio User Manual

Preparing Your LCD HDTV for Wall Mounting

The VIZIO VX32L can either be kept on the stand base or mounted on the wall for viewing. If you choose
to mount the VX32L on the wall, please follow the instructions below for removing the stand base.

To remove the stand base

1. Unplug all of the cables and cords
from your VIZIO VX32L HDTV20A.
2. Place the VX32L face down on a soft
and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3. Remove the eight (8) screws holding
the base to the VX32L.
4. Carefully remove the stand base.
Now, the VX32L HDTV20A can fit securely to
a mount (sold separately) by utilizing the
mounting holes in the center of the back panel
of the TV. Please make sure to read the
instructions of your specific mount to properly
hang the VX32L HDTV20A.
The pitch of the mounting holes is 420mm
horizontally and 200mm vertically.
The screw type required is metric M8, 1.25mm
pitch. The length of the screws will depend on
the thickness plate being attach to the TV set,
our brackets come with different length
screws.
To find the perfect mount for the VIZIO VX32L, browse VIZIO's certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 5/20/2008
VIZIO VX32L HDTV20A User Manual
6
www.VIZIO.com