Røgdetektor FDKC-2 Montageanvisning Installation instruction Montageanvisning Uniguard UG-3-J and UG-3-O FDKC-2 Superflow Montering og placering. Mounting and positioning. Detektoren skal placeres således, at indikeringen på detektoren The Uniguard should be installed with the air flow direction svarer til luftstrømsretningen i kanalsystemet. Detektoren kan arrows (see the Uniguard foot’s shape or on the housing top) installeres på...
Røgdetektor FDKC-2 Montageanvisning Bor hul i kanalen: Drill a hole in the duct: • Uden UG-beslag, Ø38mm • Without UG-bracket, ø 38 mm. • Med UG-Beslag, Ø51mm (se punkt 10) • With UG-bracket and/or venturi pipe with booster fan, ø 51 mm (see para 10). Afkort ikke I denne ende! Do NOT cut this end! •...
Page 4
Røgdetektor FDKC-2 Montageanvisning • Detektoren er monteret med 4 • Uniguard Superflow has 4 pieces pre- styk IP67 kabelgennemføringer mounted IP67 approved glands for cable for kabeldiameter 4-11mm. diameter 4-11mm, type Klikseal. NOTE! The cable must only be pulled KONTROLENHED RØGDETEKTORER through the Klikseal in one direction: CONTROL UNIT...
Alternativt skal separately at an appropriate collection point and not place it with det returneres til Calectro for genbrug. unsorted waste. Alternatively return it to Calectro for recycling. 12.2012 DK 2015.12.07 Specifikationerne kan ændres uden varsel.