Medisana HGD Manual page 20

Blood pressure measuring device
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
GB
3 Getting Started / 4 Use
3.2.5
Selecting
language
3.2.6
Setting contrast
3.3
PC-Link
4.1
Fitting the cuff
16
Finally, you can choose whether or not the date, time and user should be
permanently displayed by using the SELECT buttons ▲▼ to choose between
Display ON or OFF. The selected mode will flash and you can confirm with a
press of the MENU button
With the menu option „Language", you can choose the language to be used
in the menus. The information can be displayed in one of 5 languages.
• ENGLISH • DEUTSCH • FRANCAIS • ESPANOL • ITALIANO
Use the SELECT buttons ▲▼ to choose a language and confirm your selection
with a short press of the MENU button
user will be displayed.
With the menu option „Contrast", the contrast level of the display can be set
in stages using the SELECT buttons ▲▼. Once the desired contrast is set,
please confirm your selection with the MENU button
The unit is supplied with a software CD and a USB cable which you can use to
transfer the data from the MEDISANA HGD blood pressure monitor via the
USB interface to your computer. Connect one end of the USB cable to the USB
interface
6
on the unit and the other end to the USB input socket of your
computer. Select the menu option PC-Link using MENU button
SELECT buttons ▲▼, and confirm your selection by pressing the MENU but-
ton
2
again. The display of the HGD shows wavy lines which symbolise the
connection to the computer. Insert the CD into your computer and carry out
the installation process. The software guides you through the process. Once
you have inserted the CD, the installation routine starts automatically. Simply
follow the instructions on your computer monitor. The software has extensive
help files in case of problems.
The evaluation software makes it possible to display the measurements graphi-
cally or as a table.
2
.
2
. After confirmation, the time and
a. Fit the pressure cuff around your left wrist.
Make sure that
• the display panel is positioned on the inside of
the wrist.
• the wrist is free of jewellery, watches etc. The
unit must rest directly on the skin, as a reading
cannot be taken through clothing.
b. Fasten the cuff in such a way that it fits tightly but
does not constrict the arm. The cuff must not be
twisted in any way.
2
.
2
and the

Advertisement

Table of Contents
loading

Table of Contents