HP StorageWorks A6826A Installation Manual page 32

Installing the Linux Driver
Note:
driver parameter value specified in the
2. To manually unload the qla2x00 driver, enter the following command at the
32
HP recommends loading the driver using the modprobe command so that any
e. If your system has a previous version of the qla driver, rename the old
binary included in the original distribution to ensure that it does not
interfere with the updated version as follows:
# cd /lib/modules/<
drivers/addon/qla2300
# mv qla2300.o qla2300_rh.o
After renaming the older driver version, load the new driver using
modprobe after updating the dependency file.
command prompt:
# modprobe –r qla2300
A6826A PCI-X Host Bus Adapter for Linux 64-bit Systems Installation Guide
/etc/modules.conf
kernel_release_version
file takes effect.
>/kernel/